Epson TM-L90 Technical Reference - Page 53

TM-L90/TM-L90 Peeler Model Technical Reference Guide Customized values Item NV user memory capacity NV graphics memory capacity Print density Print speed Default character code table*1 Default international character*1 Number of divisions of thermal head energizing Paper selection (monochrome or two-color)*2 Paper width Black-color density in two-color printing*2 Option (underlined: initial setting) Msw Setting Msw Setting utility Mode 1KB, 64KB, 128KB, 192KB ✓ None, 64KB, 128KB, 192KB, 256KB, 320KB, ✓ 384KB 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, ✓ ✓ 110%, 115%, 120%, 125%, 130%, 135%, 140% Level 1 (Slow) - Level 6 - Level 9 (Fast) ✓ ✓*1 Initial setting: Page 0: PC437 (USA, Standard ✓ ✓ Europe) Initial setting: USA ✓ ✓ 1, 2, 3, 4 ✓ Monochrome, two-color 38 mm - 80 mm (1 mm pitches) Light, Medium, Dark ✓ ✓ ✓ ✓*3 ✓ *1: Not available for TM-L90 Peeler other than 39* models *2: Not available for TM-L90 Peeler 39* models *3: Selectable 38, 58, 60, 70, 80 mm only Note: ❏ The maximum print speed is available for only the one-part energizing mode. However, if the print duty is too high in the one-part energizing mode, the printer will automatically reduce the printing speed. ❏ The four-part energizing mode reduces power consumption. ❏ The print width can be set in 43 ways with 1 mm pitches in the range from 38 mm to 80 mm. However, it cannot be set in the range from 71 mm to 79 mm. ❏ Depending on the paper type, it is recommended to set the print density as shown in the table below for the best print quality. Receipt Label Paper type P35024 KF50 F5041(55) KL80GT Density level 90% 95% 100% 130% Setup 53