Epson TM-L90 Technical Reference - Page 47

TM-L90/TM-L90 Peeler Model Technical Reference Guide Msw8 Msw Function Initial Msw Setting Msw Setting Off On setting utility Mode 8-1 (Reserved) - - Off 8-2 User operation for recovery Send the error Send the error Off ✓ ✓ from paper layout error recovery recovery command or command open/close the cover 8-3 Paper out LED state in a paper LED On LED Off Off ✓ ✓ near-end 8-4 Maximum length of automatic 160 mm 300 mm Off ✓ ✓ paper measurement 8-5 Space insertion at left and right side of barcode print Disabled Enabled Off ✓ 8-6 Paper feed to the print starting Enabled Disabled Off ✓ ✓ position when power is turned on 8-7 (Reserved) - - Off 8-8 Printer cover open during Automatic Recoverable Off ✓ ✓ operation recoverable error error When [Msw 8-2] is Off, the paper layout is automatically measured and saved into the nonvolatile memory of the printer after recovery from the error. If [Msw8-2] is On, the printer paper layout is not changed after error recovery. If the correct paper is not inserted, the paper layout error will occur again. The [Msw 8-4] setting influences initialization at power-on when "label paper" or "receipt paper with black mark" is specified for the paper layout. Refer to "Setting Paper Layout" on page 59 for the paper layout. When [Msw 8-6] is set to "Feeding paper to the print starting position at power on is disabled", the printer does not execute the operation of feeding paper to the print starting position at power on (the printer executes the operation when its cover is opened and closed). Hence, the user should note the following points since the printer operates on the assumption that the paper has already been fed to the print starting position at power on. a) Turn off the power supply after feeding of paper to the print starting position. b) Do not open the cover while power is off. c) If you have opened the cover while the power is off, open and close the cover once while the power is on to feed the paper to the print starting position. If printing is performed without the operation described above, the paper layout error (recoverable error) may occur. If the error occurs, recover from the error by the operation selected with [Msw8-2]. If the print starting position has not been set at power-on, the printing position of the first sheet may shift, or a paper layout error may occur. Setup 47