Epson TM-L90 Technical Reference - Page 33
Adjust the sensor while checking the position of the parts circled in the following
![]() |
View all Epson TM-L90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
TM-L90/TM-L90 Peeler Model Technical Reference Guide Note: Move the N.E. detector in the direction shown by arrow. Adjustment direction N.E. detector holder Adjustment scale #1 #2 Near end sensor holder Outside diameter of specified thermal paper Approximately 36 mm {1.42"} Approximately 41 mm {1.61"} Note: Adjust the sensor while checking the position of the parts circled in the following figure. when the sensor holder position is #1 when placed vertically when the sensor holder position is #2 when placed vertically Near end sensor adjustment position Setup 33
![](/manual_guide/products/epson-tml90-technical-reference-9b83b36/33.png)
Setup
33
TM-L90/TM-L90 Peeler Model Technical Reference Guide
Note:
Move the N.E. detector in the direction shown by arrow.
Near end sensor holder
Note:
Adjust the sensor while checking the position of the parts circled in the following figure.
Near end sensor adjustment position
Adjustment scale
Outside diameter of specified thermal paper
#1
Approximately 36 mm {1.42"}
#2
Approximately 41 mm {1.61"}
N.E. detector holder
Adjustment direction
when the sensor holder position is #1
when placed vertically
when the sensor holder position is #2
when placed vertically