Epson TM-L90 Technical Reference - Page 48

Customized values Item NV user memory capacity NV graphics memory capacity Print density Print speed Default character code table*1 Default international character*1 Selection of the interface*1 Number of divisions of thermal head energizing Automatic replacement of Font A*1 Automatic replacement of Font B*1 Paper selection (monochrome or two-color)*2 Paper width Black-color density in two-color printing*2 Buzzer control*1 Option (underlined: initial setting) 1KB, 64KB, 128KB, 192KB None, 64KB, 128KB, 192KB, 256KB, 320KB, 384KB 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, 110%, 115%, 120%, 125%, 130%, 135%, 140% Level 1 (Slow) - Level 6 - Level 9 (Fast) Initial setting: Page 0: PC437 (USA, Standard Europe) Initial setting: USA Auto, UIB, Built-in USB 1, 2, 3, 4 Msw Setting utility ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Do not replace, Font B ✓ Do not replace, Font A ✓ Monochrome, two-color ✓ 38 mm - 80 mm (1 mm pitches) ✓ Light, Medium, Dark ✓ Buzzer selection: Internal, Option, Disable ✓ Buzzer frequency: Continuous, 1 time, No sound Sound pattern: Pattern A, B, C, D, or E (Refer to "Setting items of TM-L90 4** models" on page 121, about the initial settings.) Msw Setting Mode ✓ ✓*1 ✓ ✓ ✓ 3 ✓ *1: Not available for TM-L90 other than 4** models *2: Not available for TM-L90 4** models *3: Selectable 38, 58, 60, 70, 80 mm only Note: ❏ The maximum print speed is available for only the one-part energizing mode. However, if the print duty is too high in the one-part energizing mode, the printer will automatically reduce the printing speed. ❏ The four-part energizing mode reduces power consumption. ❏ The print width can be set in 43 ways with 1 mm pitches in the range from 38 mm to 80 mm. However, it cannot be set in the range from 71 mm to 79 mm. 48 Setup