Epson TM-L90 Technical Reference - Page 133

TM-L90/TM-L90 Peeler Model Technical Reference Guide Print Specifications Item Printing method Dot density Printing direction Paper width Maximum printable area Characters per line Print Speed Carriage return width Specifications Thermal line printing 0.125 mm/dot x 0.125 mm/dot (203 dpi x 203 dpi) (dpi: dots per 25.4 mm {1"}) Unidirectional with friction feed 80mm (79.5±0.5mm) (default setting) It is possible to set optional positions in the range of 38 to 70 mm {1.50 to 2.76"}. The range of 71 to 79 mm {2.80 to 3.11"} cannot be set. 72 mm {2.83"}, 576 dot positions (when the paper width is 80 mm) Font Characters per line (with 80 mm paper width) Font A 12 ✕ 24 48 Font B 9 ✕ 17 64 Kanji 24 ✕ 24 24 Kanji 20 ✕ 24 28 Kanji 16 ✕ 16 36 (Default setting is font A.) (default setting) 120 mm/s {4.72"} maximum (selected with the memory switch) 150 mm/s {5.91"} maximum (The high speed printing can be selected when the specified paper is used.) 90 mm/s {2.76"} maximum (only supported with APD) 120 mm/s {3.54"} maximum (*: available only for 4** models) 3.75 mm {0.15"} Programmable by control command. Note: The print speed listed above is the value when the printer prints with the default print density level at 24 V and 25C. The print speed may be changed automatically with the condition of the supply voltage or the head temperature. Printing speed may be slower depending on the data transmission speed and the combination of control commands. Appendix 133