Epson TM-L90 Technical Reference - Page 135
Appendix, TM-L90/TM-L90 Peeler Model Technical Reference Guide, The values in the above table are
View all Epson TM-L90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
TM-L90/TM-L90 Peeler Model Technical Reference Guide Vibration resistance Impact resistance Acoustic noise (operating) When packed: Frequency: 5 to 55 Hz Acceleration: Approximately 19.6 m/s2 {2 G} Sweep: 10 minutes (half cycle) Duration: 1 hour Directions: x, y, and z No external or internal damage should be found after the vibration test, and the unit should operate normally. When packed: Package: Epson standard package Height: 60 cm {23.62"} Directions: 1 corner, 3 edges, and 6 surfaces No external or internal damage should be found after the drop test, and the unit should operate normally. When unpacked:Height: 5 cm {1.97"} Directions: Lift one edge and release it (for all 4 edges). When the printer is not printing, no external or internal damage should be found after the drop test. Approximately 53 dB (ANSI bystander position) Note: The value as shown above is measured when the Epson evaluation printing pattern is used. This value may be different, depending on the paper to be printed, the print duty, or the print conditions, such as the print speed or the print density. The values in the above table are based on use of Epson specified paper. Appendix 135