HP 170X HP JetDirect 170X - Installation and Configuration Guide - Page 28
Install the 170X Hardware, Installing the HP Jetdirect 170X Print Server 3-3 - jetdirect test page
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Install the 170X Hardware Follow the steps below to install the 170X. For technical specifications or part numbers for power modules or parallel cables, see Appendix A. Installing the 3 HP 170X Network Cable Parallel Cable Power Figure 3-1 Connecting the 170X to the LAN and Printer 1. Connect the 170X to the network with a 10Base-T network cable. 2. Connect the 170X to the printer with a IEEE 1284 parallel cable (see Appendix A for cable part numbers). 3. Plug the DC power cord from the power module into the power port. Caution Do not use the power module shipped with the 170X with other Jetdirect products! 4. Plug the 170X power module into a wall outlet. 5. The 170X should now be on. Verify that the Status light on the 170X is blinking. If the internal self-test failed, the light will be off. For troubleshooting information, see chapter 7. Installing the HP Jetdirect 170X Print Server 3-3