HP 170X HP JetDirect 170X - Installation and Configuration Guide - Page 67
HP Jetdirect Configuration Messages - jetdirect installation software
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Table 8.2 Message General HP Jetdirect Messages (9 of 15) Description NDS SRVER PUBLIC KEY ERR Unable to read the File server public key. NO QUEUE ASSIGNED The HP Jetdirect print server detected that the print server object has not been assigned any queues to service. Assign queues to the print server object using printer installation or NetWare utilities. When multiple file servers are configured, the error is only displayed on the configuration page (also called a self-test page or configuration plot) if none of the file servers were successfully connected. NOT CONFIGURED The HP Jetdirect print server has not been configured for NetWare. Use the printer installation software to configure the print server for NetWare networks. NOVRAM ERROR The HP Jetdirect print server cannot read the contents of its NOVRAM. OUT OF BUFFERS The HP Jetdirect print server was unable to allocate a buffer from its internal memory. This indicates all buffers are busy due possibly to heavy broadcast traffic or large amounts of network traffic directed to the print server. OVERFLOW ERROR Run the power-on self-test: turn the printer off, then on again. PACKETS TRANSMITTED: Total number of frames (packets) transmitted without error. 8-12 HP Jetdirect Configuration Page Messages