HP 170X HP JetDirect 170X - Installation and Configuration Guide - Page 62
HP Jetdirect Configuration Messages 8-7 - jetdirect default ip address
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Table 8.2 Message General HP Jetdirect Messages (4 of 15) Description INITIALIZING TRYING TO CONNECT TO SERVER The HP Jetdirect print server is trying to connect to the NetWare server(s). This is a normal message. Wait until the connection is established or another status message appears. INVALID GATEWAY ADDRESS The default gateway IP address specified for the HP Jetdirect print server (through BOOTP or NOVRAM) is an invalid IP address for specifying a single node. INVALID IP ADDRESS The IP address specified for the HP Jetdirect print server (through BOOTP or NOVRAM) is an invalid IP address for specifying a single node. INVALID SERVER ADDRESS The TFTP server IP address specified for the HP Jetdirect print server (through BOOTP) is an invalid IP address for specifying a single node. INVALID SUBNET MASK The IP subnet mask specified for the HP Jetdirect print server (through BOOTP or NOVRAM) is an invalid subnet mask. INVALID SYSLOG ADDRESS The syslog server IP address specified for the HP Jetdirect print server (through BOOTP) is an invalid IP address for specifying a single node. INVALID TRAP DEST ADDRESS One of the SNMP trap (Trap PDU) destination IP addresses specified for the HP Jetdirect print server (through TFTP) is an invalid IP address for specifying a single node. LAN ERROR-AUTO REMOVAL Run the power-on self-test: turn the printer off, then on again. If this message reappears on another configuration page, you may have a problem with one of the HP Jetdirect print servers on your network. Check all the print servers on the network for proper operation. Config. Page 8 Messages HP Jetdirect Configuration Page Messages 8-7