HP 170X HP JetDirect 170X - Installation and Configuration Guide - Page 64

HP Jetdirect Configuration Messages 8-9

Get HP 170X - JetDirect Print Server PDF manuals and user guides
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Table 8.2 Message General HP Jetdirect Messages (6 of 15) Description LAN ERRORREMOVE RECEIVE Run the power-on self-test: turn the printer off, then on again. If this message reappears on the resulting configuration page, you may have a problem with one of the HP Jetdirect print servers on your network. Check all the HP Jetdirect print servers on the network for proper operation. LAN ERRORRETRY FAULTS There is a problem with your network cabling or external network configuration. Make sure that your network cable is correctly terminated at both ends. Verify operation of the hub or switch port. LAN ERRORTRANSMITTER OFF There may be a problem with your network cabling or the HP Jetdirect print server. Check the cabling on your Ethernet network. If you cannot find a problem with your network cabling, run the power-on self-test: turn the printer off, then on again. If the error persists, there is a problem with the HP Jetdirect print server. LAN ERRORUNDERFLOW There may be a problem with your network cabling or the HP Jetdirect print server. Check the cabling on your network. If you cannot find a problem with your network cabling, run the power-on self-test: turn the printer off, then on again. If the error persists, there is a problem with the HP Jetdirect print server. LAN ERROR-WIRE FAULT There is a problem with the network cabling. Check the cabling between the printer and the network. LAN HW ADDRESS: The 12-digit hexadecimal network address of the XXXXXXXXXXXX HP Jetdirect print server installed in the printer. LATE COLLISION ERROR Check the network topology, verify all cable segments, and make sure no segment is too long. LOSS OF CARRIER ERROR Check the network connections. If the connections are intact, run the power-on self-test: turn the printer off, then on again. If the error persists, call HP Support (see Chapter 1 for telephone numbers). Config. Page 8 Messages HP Jetdirect Configuration Page Messages 8-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
HP Jetdirect Configuration Page Messages 8-9
Config. Page
Messages
8
LAN ERROR-
REMOVE RECEIVE
Run the power-on self-test: turn the printer off, then
on again. If this message reappears on the resulting
configuration page, you may have a problem with one
of the HP Jetdirect print servers on your network.
Check all the HP Jetdirect print servers on the network
for proper operation.
LAN ERROR-
RETRY FAULTS
There is a problem with your network cabling or external
network configuration. Make sure that your network
cable is correctly terminated at both ends. Verify
operation of the hub or switch port.
LAN ERROR-
TRANSMITTER
OFF
There may be a problem with your network cabling or
the HP
Jetdirect print server. Check the cabling on your
Ethernet network. If you cannot find a problem with your
network cabling, run the power-on self-test: turn the
printer off, then on again. If the error persists, there is
a problem with the HP Jetdirect print server.
LAN ERROR-
UNDERFLOW
There may be a problem with your network cabling or
the HP
Jetdirect print server. Check the cabling on your
network. If you cannot find a problem with your network
cabling, run the power-on self-test: turn the printer off,
then on again. If the error persists, there is a problem
with the HP Jetdirect print server.
LAN ERROR-WIRE
FAULT
There is a problem with the network cabling. Check the
cabling between the printer and the network.
LAN HW ADDRESS:
XXXXXXXXXXXX
The 12-digit hexadecimal network address of the
HP Jetdirect print server installed in the printer.
LATE COLLISION
ERROR
Check the network topology, verify all cable segments,
and make sure no segment is too long.
LOSS OF CARRIER
ERROR
Check the network connections. If the connections are
intact, run the power-on self-test: turn the printer off,
then on again. If the error persists, call HP Support (see
Chapter 1 for telephone numbers).
Table 8.2
General HP Jetdirect Messages (6 of 15)
Message
Description