HP 170X HP JetDirect 170X - Installation and Configuration Guide - Page 69
HP Jetdirect Configuration Messages
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Table 8.2 Message General HP Jetdirect Messages (11 of 15) Description PRINTER NUMBER NOT DEFINED The printer number you assigned to the remote printer has not been defined. Assign a valid printer number to the HP Jetdirect print server, or run PCONSOLE and define a printer number for the print server. PSERVER CLOSED CONNECTION The print server requested a termination of the connection with the HP Jetdirect print server. No error exists or is indicated. Make sure the print server is running, and restart it if necessary. READY The HP Jetdirect print server has successfully connected to the server and is awaiting data. RECEIVE BUFFER ERROR Run the power-on self-test: turn the printer off, then on again. If the error persists, call HP Support (see Chapter 1 for telephone numbers). RETRY ERROR Verify that the Ethernet network cable is correctly terminated on both ends. Make sure your HP Jetdirect print server is correctly attached to your network. SECURITY EQUIVALENCE NOT SET The security equivalences for your print server are not set up properly. Reconfigure your print server. SQE ERROR Run the power-on self-test: turn the printer off, then on again. If the error persists, call the HP Support (see Chapter 1 for telephone numbers). TFTP IN PROGRESS The HP Jetdirect print server is currently in the process of obtaining its basic IP configuration information through TFTP and has not detected any errors. TFTP LOCAL ERROR The TFTP transfer of the configuration file from the host to the HP Jetdirect print server failed with the local print server encountering some form of inactivity timeout, or excessive retransmissions situation. TFTP REMOTE ERROR The TFTP transfer of the configuration file from the host to the HP Jetdirect print server failed with the remote host sending a TFTP ERROR packet to the print server. 8-14 HP Jetdirect Configuration Page Messages