HP 170X HP JetDirect 170X - Installation and Configuration Guide - Page 65
HP Jetdirect Configuration Messages
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Table 8.2 Message General HP Jetdirect Messages (7 of 15) Description LOST FRAMES: Number of times the end of the frame could not be detected while transmitting. MEMORY ERROR Run the power-on self-test: turn the printer off, then on again. If the error persists, call the HP Support (see Chapter 1 for telephone numbers). MFG ID: The manufacturing identification code. NDS AUTHENTICATION ERROR Unable to log onto the NetWare directory tree. Make sure that the print server object is defined in the directory at the correct context. NDS CONNECTION STATE ERROR The HP Jetdirect print server cannot change the NDS connection state. Check licenses on the spooling server. NDS ERR: CANNOT READ Q HOST Cannot locate the file server on the network. The server may not be running at this time or a communications problem may exist. NDS ERR: CHANGE Cannot modify the print server password to the value PSSWD FAILED expected by the HP Jetdirect print server. NDS ERR: EXCEEDS MAX SERVERS More queues were assigned than can be handled by the HP Jetdirect print server. Remove one or more print queues from the list to be serviced by Queue Server Mode. NDS ERR: INVALID The current version of the NetWare file server is not SRVR VERS supported. NDS ERR: MAX PRINT OBJECTS Too many printer objects are assigned to the print server object. Reduce the number of printer objects assigned to the print server using NWADMIN. NDS ERR: MAX QUEUE OBJECTS Too many print queue objects are assigned to the printer. Reduce the number of queues assigned. NDS ERR: NO No printer objects are assigned to the print server object PRINTER OBJECTS configured to this HP Jetdirect print server. 8-10 HP Jetdirect Configuration Page Messages