HP 170X HP JetDirect 170X - Installation and Configuration Guide - Page 68
HP Jetdirect Configuration Messages 8-13
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Table 8.2 Message General HP Jetdirect Messages (10 of 15) Description PARALLEL PORT X: CENTRONICS indicates a standard parallel connection that transfers data in one direction only (to the printer). BITRONICS indicates a parallel connection that supports bidirectional communications. MLC, ECP2/MLC, ECP2/1284.3, 1284.3, ECP2/1284.4 or 1284.4 indicates a bidirectional parallel connection (IEEE-1284) that supports an enhanced capabilities port. DISCONNECTED indicates that no printer is attached to the port or the printer is not turned on. PASSWORD ERROR The HP Jetdirect print server detected that the password for the NetWare print server object is wrong. Use the PCONSOLE utility to erase the password for the print server object. When the HP Jetdirect print server logs on again, it sets a new password. When multiple file servers are configured, the error is only displayed on the test page if none of the file servers are connected. PRINT SERVER NOT DEFINED The file server does not have a print server object that corresponds to the specified NetWare node name. Use printer installation software or PCONSOLE to create the print server object. When the HP Jetdirect print server is configured for multiple file servers, the error is only displayed on the configuration page (also called a self-test page or configuration plot) if none of the file servers made the connection. PRINTER NUMBER IN USE The printer number assigned to the printer is already in use by another printer. Assign an unused printer number. This may also occur when a printer is power cycled, in which case the error goes away after the print server times out and detects the lost connection. Config. Page 8 Messages HP Jetdirect Configuration Page Messages 8-13