HP 3015 HP LaserJet 3015 All-in-One - User Guide - Page 47
Printing on both sides of the media (manual duplexing), To manually duplex, Finishing - configuration page
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Printing on both sides of the media (manual duplexing) To print on both sides of the media (manual duplexing), you must send the media through the device twice. Manual duplexing can cause the device to become dirty, which reduces print quality. If the device becomes dirty, see Cleaning and maintenance for instructions. Note Note To manually duplex The printer driver also contains instructions and graphics for manually duplexing. 1. In the software program, open the device properties (printer driver). For instructions, see To change settings for a print job. 2. On the Finishing tab, select Print on Both Sides. If the Print on Both Sides option is dimmed or unavailable, open the device properties (printer driver). For instructions, see To change default settings across all programs. On the Device Settings tab or the Configure tab, select Allow Manual Duplexing, and then click OK. Repeat steps 1 and 2. 3. Print the document. 4. After side one has been printed, remove the remaining media from the input tray, and set it aside until after you finish your manual duplexing job. 5. Gather the printed pages, keep the printed side facing down, and straighten the stack. ENWW Printing on both sides of the media (manual duplexing) 37