HP 3015 HP LaserJet 3015 All-in-One - User Guide - Page 54
Loading originals to copy, To load originals into the automatic document feeder (ADF) input tray
View all HP 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Loading originals to copy Use these instructions to load originals into your device for copying. See Selecting media for the automatic document feeder (ADF) for information about choosing original documents for copying. Note Note To load originals into the automatic document feeder (ADF) input tray ADF capacity is up to 30 sheets of 75 g/m2 (20 lb) media (depending on the thickness of the media), or until the ADF input tray is full. The minimum size for media in the ADF is 74 by 105 mm ( (2.9 by 4.1 inches)). The maximum size for media in the ADF is 215 by 356 mm ( (8.5 by 14 inches)). The ADF output bin holds one sheet of legal-size media (215 by 356 mm (8.5 by 14 inches)). Subsequent sheets of legal-size media slide off of the ADF output bin. 1. Adjust the ADF media lever, if necessary. Move the ADF media lever to the right (single-sheet setting) if you are printing on a single sheet of thick media. 2. Load the stack of originals to be copied into the automatic document feeder (ADF) with media stack face-down and the first page to be copied at the bottom of the stack. 3. Slide the media stack into the ADF until the media does not move any farther. You might have to tap the stack into the ADF. 44 Chapter 4 Copying ENWW