HP 303B Maintenance & Service Guide: HP 303B Microtower Business PC - Page 31

Front I/O and USB Panel Housing Assembly

Get HP 303B - Minitower PC PDF manuals and user guides View all HP 303B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Front I/O and USB Panel Housing Assembly Description Front I/O and USB assembly Spare part number 586729-001 1. Prepare the computer for disassembly (Preparation for Disassembly on page 3). 2. Remove the access panel (Access Panel on page 4) 3. Lay the computer on its side with the front facing toward you. 4. Remove the front bezel (Front Bezel on page 6). 5. Unplug the four cables that connect the assembly to the system board. 6. Remove the screw (1) that secures the housing to the chassis, slide the housing up (2), and then pull the assembly away from the chassis while guiding the cables through the hole in the chassis. Figure 2-16 Removing the front I/O assembly To install the housing assembly, reverse the removal procedures. Front I/O and USB Panel Housing Assembly 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
Front I/O and USB Panel Housing Assembly
Description
Spare part number
Front I/O and USB assembly
586729-001
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
3
).
2.
Remove the access panel (
Access Panel
on page
4
)
3.
Lay the computer on its side with the front facing toward you.
4.
Remove the front bezel (
Front Bezel
on page
6
).
5.
Unplug the four cables that connect the assembly to the system board.
6.
Remove the screw
(1)
that secures the housing to the chassis, slide the housing up
(2)
, and then
pull the assembly away from the chassis while guiding the cables through the hole in the
chassis.
Figure 2-16
Removing the front I/O assembly
To install the housing assembly, reverse the removal procedures.
Front I/O and USB Panel Housing Assembly
23