HP 303B Maintenance & Service Guide: HP 303B Microtower Business PC - Page 33
Removing the power switch
View all HP 303B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
8. Press the tabs near the bottom on both sides of the switch holder (1) to disengage it from the chassis, rotate the bottom of the switch upward (2), and then pull it away from the chassis while guiding the wires through the hole in the chassis. Figure 2-18 Removing the power switch To install the power switch/LED assembly, reverse the removal procedures. Power Switch/LED Assembly 25
8.
Press the tabs near the bottom on both sides of the switch holder
(1)
to disengage it from the
chassis, rotate the bottom of the switch upward
(2)
, and then pull it away from the chassis while
guiding the wires through the hole in the chassis.
Figure 2-18
Removing the power switch
To install the power switch/LED assembly, reverse the removal procedures.
Power Switch/LED Assembly
25