HP 5100 HP LaserJet 5100 Series - User Guide - Page 155

Cfg Tcp/ip=no, Bootp=yes, Dhcp=yes, Bootp=no, Dhcp=no, Cfg Link=no, 10t Half, 10t Full

Get HP 5100 - LaserJet B/W Laser Printer PDF manuals and user guides
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 155 highlights

EIO Menu (Continued) Item CFG TCP/IP=NO Values NO YES CFG LINK=NO NO YES Explanation NO: The TCP/IP Menu is not accessible. YES: The TCP/IP Menu appears. In the TCP/ IP Menu, you can specify BOOTP=YES or DHCP=YES for TCP/IP parameters to be automatically loaded from a bootp or DHCP server when the printer is turned on. If you specify BOOTP=NO and DHCP=NO , you can manually set selected TCP/IP parameters from the control panel. You can manually set each byte of the IP address (IP), Subnet Mask (SM), Syslog Server (LG), and Default Gateway (GW). For example: Byte 1 192.0.0.192 Byte 4 Byte 2 Byte 3 If the Syslog Server IP address is left blank, the printer will still work. Also, you can manually set the Timeout time period. NO: The 10/100Base-TX link configuration menu will not be accessed. YES: Allows you to access and manually set 10/100Base-TX link parameters. • AUTO: (Default) The print server will automatically configure itself to match the network's link speed and communication mode. • 10T HALF: Sets 10 Mbps, Half-duplex operation on the print server. • 10T FULL: Sets 10 Mbps, Full-duplex operation on the print server. • 100TX HALF: Sets 100 Mbps, Half-duplex operation on the print server. • 100TX FULL: Sets 100 Mbps, Full-duplex operation on the print server. ENWW Control Panel Menus B-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
ENWW
Control Panel Menus
B-19
CFG TCP/IP=NO
NO
YES
NO
: The TCP/IP Menu is not accessible.
YES
: The TCP/IP Menu appears. In the TCP/
IP Menu, you can specify
BOOTP=YES
or
DHCP=YES
for TCP/IP parameters to be
automatically loaded from a bootp or DHCP
server when the printer is turned on. If you
specify
BOOTP=NO
and
DHCP=NO
, you can
manually set selected TCP/IP parameters from
the control panel. You can manually set each
byte of the IP address (IP), Subnet Mask (SM),
Syslog Server (LG), and Default Gateway
(GW). For example:
If the Syslog Server IP address is left blank, the
printer will still work. Also, you can manually set
the Timeout time period.
CFG LINK=NO
NO
YES
NO:
The 10/100Base-TX link configuration
menu will not be accessed.
YES:
Allows you to access and manually set
10/100Base-TX link parameters.
•
AUTO:
(Default) The print server will
automatically configure itself to match the
network’s link speed and communication
mode.
•
10T HALF:
Sets 10 Mbps, Half-duplex
operation on the print server.
•
10T FULL:
Sets 10 Mbps, Full-duplex
operation on the print server.
•
100TX HALF:
Sets 100 Mbps, Half-duplex
operation on the print server.
•
100TX FULL:
Sets 100 Mbps, Full-duplex
operation on the print server.
EIO Menu (Continued)
Item
Values
Explanation
192.0.0.192
Byte 1
Byte 2
Byte 3
Byte 4