HP 5100 HP LaserJet 5100 Series - User Guide - Page 95
Tray X Load, In Tray [yy]
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Printer Messages (Continued) Message Explanation or Recommended Action RAM DISK FILE SYSTEM IS FULL Delete files and then try again, or turn the printer off, and then turn the printer on to delete all files on the device. (Delete files using HP Web JetAdmin, or another software utility. See the software help for more information.) If the message persists, increase the size of the RAM disk. Change the RAM disk size from the Configuration Menu in the printer's control panel (page B-14). RESEND UPGRADE There is an error in the printer's flash firmware. Resend a valid firmware image. TRAY x EMPTY Load the empty tray (x) to clear the message. If you do not load the specified tray, the printer will continue printing from the next available tray, and the message will continue to display. TRAY x LOAD [TYPE] [SIZE] Load the requested paper into the specified tray (x). (See the sections on loading paper, starting on page 28.) Ensure that the trays are correctly adjusted for size. The size displayed on the front of the paper tray must match the size of paper loaded in the tray. The tray type settings (and size for Tray 1) must be set from the printer's control panel (page 57). If you are trying to print A4 or letter size paper, and this message appears, make sure the default paper size is set correctly from the Printing Menu in the printer's control panel. Press [Go] to print from the next available tray. Press [-Value+] to scroll through the available types and sizes. Press [Select] to accept the alternate type or size. TRAY 2 LOAD LEGAL (or similar messages requesting that you load paper) Load the requested paper into the indicated tray, or press [Select] to override the message and to print on a loaded paper size. If printing does not continue, press [Go]. UNABLE TO STORE JOB A job cannot be stored on the printer because of memory or file system configuration. UNSUPPORTED SIZE An external paper handling device detected an unsupported paper IN TRAY [YY] size. The printer will go offline until the condition is corrected. USE [TYPE] [SIZE] INSTEAD? If the requested paper size or type is not available, the printer asks if it should use another paper size or type instead. Press [-Value+] to scroll through the available types and sizes. Press [Select] to accept the alternate type or size. WAIT FOR PRINTER The RAM disk setting has been changed from the printer's control TO REINITIALIZE panel. This change will not take effect until the printer reinitializes. ENWW Chapter 4: Problem Solving 87