HP 8100C HP Digital Sender 8100C - (English) User Guide, C7707-90005 - Page 62
Control panel messages continued - hard drive
View all HP 8100C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
60 Control panel messages (continued Message Description Action Invalid PIN. Job canceled. You incorrectly entered the PIN (personal identification number) for the HPJetSend-enabled printer to which you were sending. Resend the document, entering the correct PIN number. JetDirect not responding. Please check the card or the firmware version. The firmware version of the Contact the administrator. HPJetDirect print server (interface card) installed in the digital sender is not compatible with the product. JetSend subsystem busy. The digital sender has another HPJetSend job pending. The pending HP JetSend job must complete before you can submit another one. Wait and retry. LDAP protocol error. Search error. The LDAP search could not complete because of a problem with a network connection or LDAP server. Turn the digital sender off and then back on. If the problem persists, contact the administrator. Low resources. There is not enough space on the hard drive to process the job (for example,because too many other jobs are pending). Try again later. Missing page in second pass. Job canceled. You selected the duplex mode, but Press any key to clear the message. Check your pages there are fewer pages in the second and retry the job. pass than in the first. Network error codes. There is a problem with the HPJetDirect print server. Turn the digital sender off and then back on. Note the codes and contact the administrator. No destination available. No destination has been configured Contact the administrator. for the customized function key that you selected. No matches found. There is no entry in the LDAP Check the accuracy of your search string and search directory that matches your search criteria. string and search criteria. No pages scanned. Job canceled. After a paper-jam error, you did not Press any key to clear the message. Place the document reinsert a document in the ADF. in the ADF and try again. Object not found. Check your configuration. Either the search root or the name/ Contact the administrator. password combination for authenticating searches in the LDAP server is incorrect. Paper feeder not connected. Check The ADF unit is not securely the paper feeder cable. connected to the digital sender. Make sure the cable that attaches the ADF unit to the digital sender is connected securely. Partial results. Check your configuration. The search root for searches in the Contact the administrator. LDAP server is incorrect.