HP 9050 HP LaserJet 9040mfp/9050mfp - User Guide - Page 126

Clearing jams Note If a jam message appears on the control panel, look for paper in the locations indicated in the following illustration. You might need to look for jammed media in locations other than those that are indicated in the jam message. If the location of the jam is not obvious, look first in the front door area. After looking at the illustration, you can go to the procedure for clearing the jam. When clearing jams, be very careful not to tear the media. If a small piece of media remains in the MFP, it could cause additional jams. If jams are a recurring problem, see Solving repeated jams. Loose toner might remain in the MFP after a jam and cause output quality problems. These should clear up within a few pages. Jam locations 1 112 111 12 110 13 19 14 18 15 17 16 HP LaserJet 9040mfp or HP LaserJet 9050mfp with the 3000-sheet stacker/stapler 1. ADF 2. Tray 1 3. Right door 4. Vertical transfer door 5. Tray 4 6. Tray 2 and Tray 3 7. Left door (behind the output device) 8. Duplexer (inside the MFP) 9. Output device 10. Lower bin 11. Front door and print-cartridge area 12. Upper bin 122 Chapter 10 Problem solving ENWW