HP 9050 HP LaserJet 9040mfp/9050mfp - User Guide - Page 205

Item DUPLEX BINDING=LONG EDGE OVERRIDE A4/ LETTER= YES Values LONG EDGE SHORT EDGE YES NO MANUAL FEED=OFF OFF ON EDGE TO EDGE NO OVERRIDE=NO YES COURIER FONT=REGULAR REGULAR DARK WIDE A4=NO YES NO PRINT PS ON ERRORS=OFF OFF PRINT PDF ON ERRORS=OFF OFF Explanation Allows the user to change the binding edge for duplex printing. The menu item is displayed when a duplex printing accessory is installed in the MPF and DUPLEX=ON. This command is used to print on Letter-size media when an A4 job is sent but no A4-size media is loaded in the MFP (or to print on A4-size media when a Letter job is sent, but no Letter-size media is loaded in the MFP). Feed the paper manually from Tray 1, rather than automatically from a tray. When MANUAL FEED=ON and Tray 1 is empty, the MFP goes offline when it receives a print job. It then displays MANUALLY FEED [PAPER SIZE]. For more information, see Manually feeding paper from Tray 1. Turns the edge-to-edge mode on or off for all print jobs. This mode can be overridden inside a print job by an edge-to-edge PJL variable. Select the version of Courier font to use: REGULAR: The internal Courier font available on the HP LaserJet 4 Series printers. DARK: The internal Courier font available on the HP LaserJet III Series printers. Both fonts are not available at the same time. The Wide A4 setting changes the number of characters that can be printed on a single line of A4 paper. YES: Up to 80 10-pitch characters can be printed on one line. NO: Up to 78 10-pitch characters can be printed on one line. Select ON to print the PS error page when PS errors occur. Select ON to print the PDF error page when PDF errors occur. ENWW Configure device menu 201