HP CM6030 HP Color LaserJet CM6030/CM6040 MFP Series - Software Technical Refe - Page 308

Table 6-15 Trays 2, 3, 4, and 5 paper information (continued) Type Specifications Quantity Settings Paper orientation Transparencies Minimum 0.13 mm (0.005 in) thick Maximum stack height: Transparencies 54 mm (2.1 in) Side to be printed on facing up Heavy 0.13 mm (0.005 in) thick Maximum stack height: Light glossy, glossy, or Side to be printed on 54 mm (2.1 in) heavy glossy facing up Glossy 75 g/m2 (20 lb) bond to Maximum stack height: Light glossy, glossy, or Side to be printed on 220 g/m2 (58 lb) bond 54 mm (2.1 in) heavy glossy facing up Photo media 60 g/m2 (16 lb) bond to Maximum stack height: Light glossy, glossy, or Side to be printed on 220 g/m2 (58 lb) bond 54 mm (2.1 in) heavy glossy facing up Cut sheet paper Tough paper 60 g/m2 (16 lb) bond to Maximum stack height: Plain or unspecified 220 g/m2 (58 lb) bond 54 mm (2.1 in) 60 g/m2 (16 lb) bond to Maximum stack height: HP Tough Paper 220 g/m2 (58 lb) bond 54 mm (2.1 in) Side to be printed on facing up Side to be printed on facing up Trays 2, 3, 4, and 5 capacity: 54 mm (2.126 in) height or 500 sheets of paper, whichever is less. Supported media types include: Cut sheet paper, labels, OHT, glossy paper, glossy film, photo media, and tough paper. Basis Weight: 60-220 g/m2 (16-58 lb). Duplex printing: Provides automatic two-sided printing (printing on both sides of the paper). The paper size range for automatic duplex printing is 175 to 320 mm (7.2 to 12.6 in) x 210 to 457 mm (8.3 to 18 in). The media weight range is 60 to 220 g/m2 (16 to 58 lb) NOTE: HP Color Laser Presentation Paper, Glossy (Q2546A) is not supported with this product. Using this type of paper can cause a fuser jam that might require the replacement of the fuser. Two recommended alternatives are HP Color LaserJet Presentation Paper, Soft Gloss (Q6541A), and HP Color LaserJet Brochure Paper, Glossy (Q6611A, Q6610A). NOTE: For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/ sbso/product/supplies. Special paper or print media guidelines This product supports printing on special media. Use the following guidelines to obtain satisfactory results. When using special paper or print media, be sure to set the type and size in your print driver to obtain the best print results. CAUTION: HP LaserJet printers use fusers to bond dry toner particles to the paper in very precise dots. HP laser paper is designed to withstand this extreme heat. Using inkjet paper not designed for this technology could damage your printer. Media type Envelopes Do Do not ● Store envelopes flat. ● Do not use envelopes that are ● Use envelopes where the seam wrinkled, nicked, stuck together, or otherwise damaged. extends all the way to the corner of the envelope. ● Do not use envelopes that have ● Use peel-off adhesive strips that clasps, snaps, windows, or coated linings. are approved for use in laser printers. ● Do not use self-stick adhesives or other synthetic materials. 288 Chapter 6 Engineering details ENWW