HP Digital Sender Flow 8500 User Guide - Page 96
Replace the front panel
View all HP Digital Sender Flow 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Replace the front panel TIP: An animation which guides you through removing and replacing the front panel is available on the web (see www.hp.com/support, and search on your product). To replace the front panel, follow these steps: 1. Press the Power button to turn off the product, and then disconnect the power cable. 2. Raise the scan lid. 3. Locate the indents on the underside of the front panel, press in at the location shown, and then lift the front panel gently as it releases. 4. Invert the front panel, hold it firmly with one hand, disconnect the ribbon cable (1), and then gently pull the ribbon cable through the cable restraint (2). 88 Chapter 8 Replace and install components ENWW
Replace the front panel
TIP:
An animation which guides you through removing and replacing the front panel is available on the web
(see
www.hp.com/
support
, and search on your product).
To replace the front panel, follow these steps:
1.
Press the Power button to turn off the product, and then disconnect the power cable.
2.
Raise the scan lid.
3.
Locate the indents on the underside of the front panel, press in at the location shown, and then lift the
front panel gently as it releases.
4.
Invert the front panel, hold it firmly with one hand, disconnect the ribbon cable (1), and then gently pull
the ribbon cable through the cable restraint (2).
88
Chapter 8
Replace and install components
ENWW