HP Elite 8300 HP Compaq Business PC Maintenance and Service Guide Elite 8300 S - Page 139
Preparation for Disassembly, on Computer Access Panel,
View all HP Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Description AMD FirePro 2270 PCIe x16 graphics card, 512 MB Intel PRO/1000CT2 NIC, includes bracket HP FireWire / IEEE 1394a PCIe x1 Card Spare part number 637213-001 635523-001 637591-001 The computer has one PCI expansion slot, one PCI Express x1 expansion slot, one PCI Express x16 expansion slot, and one PCI Express x16 expansion slot that is downshifted to a x4 slot. NOTE: You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 slot. For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16 slot that is NOT downshifted to a x4 slot. To remove, replace, or add an expansion card: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 119) 2. Remove the access panel (Computer Access Panel on page 120) 3. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis. 4. Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on the latch and rotating the latch to the open position. Figure 7-7 Opening the Expansion Slot Retainer 128 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis