HP Elite 8300 HP Compaq Business PC Maintenance and Service Guide Elite 8300 S - Page 249
CAUTION, Preparation for Disassembly, on Access Panel, Memory, Front Fan
View all HP Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
System Board Description System board Front I/O panel Spare part number 657095-001 587458-001 CAUTION: Be very careful when removing or replacing the system board to prevent damaging it. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 204). 2. Remove the computer access panel (Access Panel on page 205). 3. Remove the memory modules (Memory on page 211). 4. Remove the front fan (Front Fan on page 215). 5. Remove the optical drive (Removing the Optical Drive on page 216). 6. Remove the hard drive (Hard Drive on page 219). 7. Remove the optical drive rail (Optical Drive Rail on page 224). 8. Remove the heat sink (Heat sink on page 228). 9. Disconnect the rear fan cable from the system board. 10. Disconnect any remaining cables connected to the system board, noting their location for reinstallation. 11. Remove the front I/O panel: a. Remove the Torx T15 screw from the right side of the panel that secures it to the front of the chassis. Figure 9-34 I/O panel screw 238 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis