HP Elite 8300 HP Compaq Business PC Maintenance and Service Guide Elite 8300 S - Page 202
Front I/O, Power Switch Assembly
View all HP Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Front I/O, Power Switch Assembly Description Front I/O and power switch assembly Spare part number 636926-001 The front I/O and power switch/LEDs is one assembly, attached to the front of the chassis. Push the assembly into the chassis to remove. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 160). 2. Remove the access panel (Access Panel on page 161). 3. Remove the front bezel (Front Bezel on page 162). 4. Remove the chassis fan (Front Fan Assembly on page 188). 5. Rotate the drive cage to its upright position. 6. Disconnect the four cables from the system board as follows: ● Yellow connector labeled FRONT_USB ● Green connector labeled FRONT_USB2 ● Blue connector labeled FRONT AUD ● Black connector labeled PB/LED Figure 8-32 Disconnecting the front I/O, power switch/LED assembly cables 7. Remove the Torx T15 screw (1) that secures the assembly to the front of the chassis. Front I/O, Power Switch Assembly 191