HP Elite 8300 HP Compaq Business PC Maintenance and Service Guide Elite 8300 S - Page 93

4. Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3). 5. Repeat steps 3 and 4 to install any additional modules. 6. Replace the computer access panel. 7. Reconnect the power cord and turn on the computer. 8. Lock any security devices that were disengaged when the access panel was removed. The computer should automatically recognize the additional memory the next time you turn on the computer. Expansion Card Description nVidia Quadro NVS310 PCIe x16 graphics card, 512 MB nVidia Quadro NVS300 PCIe x16 graphics card, 512 MB AMD Radeon HD7450 PCIe x16 graphics card, 1 GB AMD Radeon HD6350 PCIe x16 graphics card, 512 MB AMD FirePro 2270 PCIe x16 graphics card, 512 MB Intel PRO/1000CT2 NIC, includes bracket HP FireWire / IEEE 1394a PCIe x1 Card Spare part number 680653-001 632486-001 682411-001 637995-001 637213-001 635523-001 637591-001 The computer has three standard full-height PCI expansion slots, one PCI Express x1 expansion slot, one PCI Express x16 expansion slot, and one PCI Express x16 expansion slot that is downshifted to a x4 slot. NOTE: You can install a PCI Express x1, x8, or x16 expansion card in the PCI Express x16 slots. For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16 slot that is NOT downshifted to a x4 slot. To remove, replace, or add an expansion card: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 72). 2. Remove the computer access panel (Access Panel on page 73). 3. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis. 82 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis