HP Elite 8300 HP Compaq Business PC Maintenance and Service Guide Elite 8300 S - Page 233

8. Position the hard drive so that the top of the hard drive is up against the top of the carrier (1) so that the circuit board on the bottom of the hard drive does not come in contact wit the tabs on the bottom of the carrier, then slide the new hard drive into the carrier (2). CAUTION: Do not allow the circuit board on the bottom of the hard drive to scrape along the tabs on the bottom of the carrier when sliding the hard drive into the carrier. Doing so can cause irreparable damage to the hard drive. Figure 9-18 Sliding the hard drive into the carrier 9. Set the hard drive down into the bottom of the carrier (1), then replace the four guide screws on the sides of the carrier to secure the drive in the carrier (2). Figure 9-19 Lowering the hard drive and replacing the guide screws 222 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis