HP LaserJet Pro P1102 HP LaserJet Professional P1100 Printer series - User Gui - Page 40

IP address, Link speed setting, Manual IP Address

Get HP LaserJet Pro P1102 PDF manuals and user guides View all HP LaserJet Pro P1102 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

IP address The product IP address can be set manually, or it can be configured automatically using DHCP, BootP, or AutoIP. To change the IP address manually, use the HP Embedded Web Server. 1. Open the HP Embedded Web Server, and then click the Networking tab. 2. In the navigation pane, click the IPv4 Configuration link or the IPv6 Configuration link. 3. In the IP Address Configuration section, click the Manual IP option. 4. Type the required data in the Manual IP Address box, the IP Subnet Mask box, and the Manual Default Gateway box. 5. Click the Apply button. Link speed setting Use the Networking tab in the HP Embedded Web Server to set the link speed if necessary. The setting is on the Advanced page. Incorrect changes to the link speed setting might prevent the product from communicating with other network devices. For most situations, leave the product in automatic mode. Changes can cause the product to turn off, and then on. Only make changes when the product is idle. 28 Chapter 4 Connect the product ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
IP address
The product IP address can be set manually, or it can be configured automatically using DHCP, BootP,
or AutoIP.
To change the IP address manually, use the HP Embedded Web Server.
1.
Open the HP Embedded Web Server, and then click the
Networking
tab.
2.
In the navigation pane, click the
IPv4 Configuration
link or the
IPv6 Configuration
link.
3.
In the
IP Address Configuration
section, click the
Manual IP
option.
4.
Type the required data in the
Manual IP Address
box, the
IP Subnet Mask
box, and the
Manual
Default Gateway
box.
5.
Click the
Apply
button.
Link speed setting
Use the
Networking
tab in the HP Embedded Web Server to set the link speed if necessary. The setting
is on the
Advanced
page.
Incorrect changes to the link speed setting might prevent the product from communicating with other
network devices. For most situations, leave the product in automatic mode. Changes can cause the
product to turn off, and then on. Only make changes when the product is idle.
28
Chapter 4
Connect the product
ENWW