HP NetServer LXr Pro8 HP Netserver E 60, LC 3, LH 3/3r, and LPr Processor Upgr - Page 3

Contents 1 Introduction 1 About This Upgrade Accessory 1 About This Guide 2 Accessory Kit Contents 2 Tools ...3 Processor Module Form Factors 4 2 Preparation 5 Preparation Overview 5 Verify CD-ROM Version 5 View the Readme File 6 Update the BIOS, if Necessary 7 Write Down Hard Drive Priority 7 Update System BIOS 8 Reconfigure Hard Drive Priority 9 3 Installation in LC 3 and LH 3/3r 11 Installation Overview 11 Disconnect the NetServer 13 Remove the Front Bezel and Covers 14 Remove the System Board 14 Install the Processor Modules and VRMs 16 Removing the Terminator Board 17 Removing the Existing Processor Module 18 Removing a Processor Module Without a Processor Retaining Latch.. 19 Removing a Processor Module With a Processor Retaining Latch....... 20 Installing Processor Modules 22 Installing a VRM 28 Installing Terminator Board for Single-Processor NetServer 30 Setting System Switches 32 Reinstall the System Board 33 Replace Covers and Front Bezel 33 4 Installation in E 60 and LPr 35 Installation Overview 35 Disconnect the NetServer 37 iii