HP NetServer LXr Pro8 HP Netserver E 60, LC 3, LH 3/3r, and LPr Processor Upgr - Page 30
that case, press firmly on the processor module to seat it.
View all HP NetServer LXr Pro8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 3 Installation in LC 3 and LH 3/3r 5. Verify that the processor ejector lever has rotated over the edge of the processor retaining latch, as shown in Figure 3-12. If the ejector lever is not fully rotated, gently push it into place. If the ejector lever does not rotate easily over the edge of the processor retaining latch, the processor module is not fully inserted into its slot. In that case, press firmly on the processor module to seat it. Hooks to Engage Processor Ejector Lever Processor Ejector Lever Processor Mounting Bracket Secondary Processor Position Primary Processor Position Figure 3-12. Rotate the Processor Ejector Lever (Shown for Secondary Processor Module) 6. Verify that two hooks on the processor retaining latch have engaged the back of the ejector lever, as shown in Figure 3-12. These hooks hold the ejector lever in place. 26