HP Omni Pro 110 Maintenance and Service Guide: HP Omni Pro 110 All-in-One PC - Page 18
Computer Setup—Advanced - ram
View all HP Omni Pro 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Computer Setup-Advanced NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. WARNING! Setting items on this menu to incorrect values may cause your system to malfunction. Table 3-2 Computer Setup-Advanced Option Description CPU Type (view only) CPU Speed (view only) Cache RAM (view only) Supervisor Password Allows you to establish, disable, or change the supervisor password. User Password Allows you to establish, disable, or change the user password. NOTE: Only displays if a Supervisor password is set. Onboard LAN Allows you to disable/enable onboard LAN controller. Default is enabled. Onboard WLAN Allows you to disable/enable onboard WLAN controller. Default is enabled. Onboard LAN Boot Allows you to disable/enable the boot ROM of the onboard LAN chip. Default is enabled. ROM Onboard 1394 Allows you to enable/disable all 1394 ports. Default is enabled. Primary Video Adapter Allows you to select the boot display device when more than 2 video options are offered by the system: ● Integrated (Onboard) ● PCI-E SATA Controller Allows you to disable/enable the SATA controller. Default is enabled. SATA Controller Mode If SATA Controller is enabled, allows you to set the mode to: ● IDE ● AHCI (default) Onboard Audio Allows you to set the onboard audio to: ● Auto (default) ● Disabled ● Enabled USB Ports Allows you to individually disable/enable USB ports. Default is enabled. Change Supervisor Password Allows you to change the supervisor password. Press Enter to change the password. Press Enter again to disable the password. 10 Chapter 3 Computer Setup (F10) Utility