HP Omni Pro 110 Maintenance and Service Guide: HP Omni Pro 110 All-in-One PC - Page 65
System Board
View all HP Omni Pro 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
System Board Description System board Thermal pad, DIMM (20mm x 50mm x 2.5mm) Thermal pad, VRM (15mm x 40mm x 4mm) Thermal pad, VRM (20mm x 20mm x 4mm) Spare part number 648965-001 651595-001 651596-001 TBD To remove the system board: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 28). 2. Remove the small rear cover (see Small Rear Cover on page 29). 3. Remove the stand (see Stand on page 30). 4. Remove the right rear cover (see Right Rear Cover on page 36). 5. Remove the heat sink (see Heat Sink (Thermal Module) on page 39). 6. Remove the rear cover (see Rear Cover on page 47). 7. Remove the system board shield (see System Board Shield on page 52). 8. Disconnect all cables from the system board, noting their location for reinstallation. 9. Remove the six screws (1) that secure the system board to the computer. 10. Disconnect any cables still connected to the system board, noting their location for re-connection. System Board 57