HP Omni Pro 110 Maintenance and Service Guide: HP Omni Pro 110 All-in-One PC - Page 61
Fan, Remove the system board shield see
View all HP Omni Pro 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Fan Description Fan Spare part number 651606-001 The fan is located near the top of the computer. It is secured with three screws. To remove the fan: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 28). 2. Remove the small rear cover (see Small Rear Cover on page 29). 3. Remove the stand (see Stand on page 30). 4. Remove the right rear cover (see Right Rear Cover on page 36). 5. Remove the heat sink (see Heat Sink (Thermal Module) on page 39). 6. Remove the rear cover (see Rear Cover on page 47). 7. Remove the system board shield (see System Board Shield on page 52). 8. Remove the three screws (1) that secure the fan to the computer. 9. Disconnect the fan cable (2) from the system board connector. Fan 53