HP Omni Pro 110 Maintenance and Service Guide: HP Omni Pro 110 All-in-One PC - Page 47
Heat Sink (Thermal Module)
View all HP Omni Pro 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Heat Sink (Thermal Module) Description Heat sink (thermal module) Spare part number 651607-001 The heat sink is secured with five screws and four clips. You have to remove the heat sink cover to access the heat sink. To remove the heat sink: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 28). 2. Position the computer with the rear facing you. 3. Remove the small rear cover (see Small Rear Cover on page 29). 4. Remove the stand (see Stand on page 30). 5. Remove the right rear cover (see Right Rear Cover on page 36). 6. Remove the heat sink cover by removing the five screws that secure it to the computer (1), and then lifting the cover off the computer (2). Figure 7-11 Removing the heat sink cover Heat Sink (Thermal Module) 39