HP Omni Pro 110 Maintenance and Service Guide: HP Omni Pro 110 All-in-One PC - Page 67
Stand Bracket,
View all HP Omni Pro 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Stand Bracket The stand bracket is secured with four screws. Removing it allows access to the fans, heat sink, processor, and optional TV tuner. To remove the stand bracket: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 28). 2. Remove the small rear cover (see Small Rear Cover on page 29). 3. Remove the stand (see Stand on page 30). 4. Remove the right rear cover (see Right Rear Cover on page 36). 5. Remove the heat sink (see Heat Sink (Thermal Module) on page 39). 6. Remove the rear cover (see Rear Cover on page 47). 7. Remove the four screws (1) that secure the bracket to the computer. 8. Lift the bracket from the computer (2). Figure 7-28 Removing the stand bracket To replace the stand bracket, reverse the removal procedures. Stand Bracket 59