HP OmniBook xt6200 HP Omnibook xt6200 & vt6200 Notebook PCs - Reference Gu - Page 121

Troubleshooting and Maintenance Configuring the Computer Setting BIOS Revision Main Menu Description Shows the current BIOS version. System Time System Date Internal Hard Disk Sets the time using 24-hour format. Values set take effect immediately. Sets the date using dd/mm/yy format (except English, which uses mm/dd/yy format). Sets the hard disk drive type and various parameters. Video Configuration Quiet Boot Video Display Device Video Expansion Primary Video Adapter Television Type System Memory Extended Memory Press ENTER to see or change the video settings below. Press ESC to return to the main menu. When enabled, hides summary of power-on self-test and messages during boot. Sets whether the built-in display automatically switches to an external display, if one is detected. When enabled, the video image covers the entire display in lower resolution modes. When disabled, the video image is centered in the display. Sets whether the computer automatically switches to an external video adapter connected to the docking system, if one is detected. Controls the signal format (NTSC or PAL) output by the S-video port. Shows the system memory size. Shows the extended memory size. Unique Dock ID UUID MAC Address Serial Number Sets whether the computer creates a unique hardware profile for each dock (Enabled) or uses a common profile for all docks (Disabled). Displays the value of the 16-byte UUID (Universally Unique ID) as 32 hex characters. Displays the MAC network address of the internal (wired) LAN. Displays the serial number as shown on the back of the unit. Service ID Displays an identifier used for repair service. Default Detected automatically. Detected automatically. Enabled Auto Disabled Auto NTSC 640 KB Detected automatically. Enabled Detected automatically. Detected automatically. Detected automatically. Detected automatically. Reference Guide 121