HP PSC 2350 Users Guide - Page 56
Make a 10 by 15 cm (4 by 6 inch) borderless copy of a photo, Copy Menu, Reduce/Enlarge
View all HP PSC 2350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
To copy a two-page document from the control panel 1 Make sure you have paper loaded in the paper tray. 2 Load the first page of your original face down on the right front corner of the glass. 3 Press Copy, if not already lit. 4 Press Start Copy Black. 5 Remove the first page from the glass and load the second page. 6 Press Start Copy Black. Make a 10by 15cm (4by 6inch) borderless copy of a photo For the best quality when copying a photo, load photo paper in the paper tray and change your copy settings for the correct paper type and photo enhancement. You might also want to use the photo print cartridge for superior print quality. With the tricolor and photo print cartridges installed, you have a six-ink system. For more information, see Use a photo print cartridge. To copy a photo from the control panel 1 Load 10 by 15 cm (4 by 6 inch) photo paper in the paper tray. Warning In order to make a borderless copy, you must have photo paper (or other specialty paper) loaded. If the HP all-in-one detects plain paper in the input tray, it will not make a borderless copy. Instead, your copy will have borders. 2 Load your original photo face down on the right front corner of the glass. Position the photo on the glass so the long edge of the photo is along the front edge of the glass. 3 Press Copy Menu. This displays the Copy Menu. 4 Press 2, and then press 3. This displays the Reduce/Enlarge menu, and then selects Fill Entire Page. 5 Press Start Copy Color. The HP all-in-one makes a 10 by 15 cm (4 by 6 inch) borderless copy of your original photo, as shown below. Use the copy features User Guide 53