HP Pavilion a400 HP Pavilion Desktop PC - (English) Users Guide PAV SEA/ANZ/IN - Page 113
after closing the pc, removing the side panel
View all HP Pavilion a400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
after closing the pc To avoid injury and equipment damage, always follow this procedure in this order after closing the PC: 1 Reconnect the power cord and all other attached cables (such as the keyboard, mouse, and monitor). 2 Reconnect the modem/telephone cable. 3 Turn on the PC and all peripherals. 4 If you installed an add-in card, install any software drivers supplied by the card manufacturer. removing the side panel 1 See "before opening the pc" on page 104. 2 Loosen the two thumbscrews on the right side of the back panel. The first time you loosen these screws, you may need to use a Phillips screwdriver. These screws do not detach; they stay on the side panel loosely until you tighten them again. 3 Pull the panel back toward you until it stops. Lift the panel off the chassis and set it aside. NOTE: You do not need to remove the other side panel to replace the hardware listed in this guide. upgrading and servicing the pc (1) 105