HP Pavilion a400 HP Pavilion Desktop PC - (English) Users Guide PAV SEA/ANZ/IN - Page 135
installing an add-in card
View all HP Pavilion a400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
installing an add-in card 1 Insert the new card into the slot and push straight down. Make sure the card is properly seated. 2 Attach the screw to secure the card you have replaced. 3 Connect any external or internal cables attached to the card. 4 Replace the side panel. See page 106. NOTE: If the new card or device isn't working, read through the card manufacturer's installation instructions, and recheck all connections, including those to the card, power supply, keyboard, and monitor. If the problem still exists, run the BIOS setup program and load the default settings, and then save and exit. upgrading and servicing the pc (1) 127
upgrading and servicing the pc (1)
127
installing an add-in card
1
Insert the new card into the slot and push straight down. Make sure the card
is properly seated.
2
Attach the screw to secure the card you have replaced.
3
Connect any external or internal cables attached to the card.
4
Replace the side panel. See page 106.
NOTE:
If the new card or device isn’t working, read through the card
manufacturer’s installation instructions, and recheck all connections, including
those to the card, power supply, keyboard, and monitor. If the problem still
exists, run the BIOS setup program and load the default settings, and then save
and exit.