Home » HP Manuals » Tape Drives » HP Surestore Tape Library Model 20/700 » Manual Viewer

HP Surestore Tape Library Model 20/700 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 212

Virtual Inquiry Command, A4688A FC 4/1 HV

View all HP Surestore Tape Library Model 20/700 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 212 highlights

Table 13 LUN Inquiry Data Item RelAdr Wbus32 Wbus16 Sync Linked CmdQue SftRe Vendor Product ID Revision Level Value 0x00 0x00 0x00 0x00 0x00 0x00 0x00 HP A4688A (FC 4/1 HV) A4689A (FC 2/1 LV) "XXXX" The bridge will only reply to a SCSI Inquiry when using 8-byte LUN field of 0x00's. Once the bridge has been detected, then the devices on the SCSI-2 can be detected using the SCC Logical unit addressing. Note The Revision Level comes from the last four characters of the build string, which appears in the headings for most menu screens. Virtual Inquiry Command Modeled after the INQUIRY Command, this command passes through an inquiry command to the device with the specified FCP-LUN. In addition to the INQUIRY Data from the device, 10 extra bytes of vendor unique data is appended onto the end of the device's data and returned, along with the device's data, to the initiator. 214 In-Band Management Appendix B

Section	Page
Introduction	13
Chapter Overview	13
Operation Indicators	16
Processing SCSI Information	18
HP Surestore Bridge Features	20
Fibre Channel Features	20
SCSI Bus Features	20
Configuration Features	21
Management Features	21
HP Surestore Bridge Benefits	22
Fibre Bridge Components and Supported Products	23
Choosing a Location	26
Physical Specifications	26
Environmental Specifications	26
Fibre Channel Configurations	27
Basic Configuration	27
Expanded Configuration	28
Overview	29
Chapter Overview	29
Choosing the Right Configuration	30
Fibre Channel Port Mode	32
Fibre Channel Arbitrated Loop Addressing	33
Hard Addressing	33
Soft Addressing	33
Host Device Configuration	34
SCSI Addressing	35
Buffered Tape Writes	36
Fibre Channel-to- SCSI Mode	37
Address Mapping	38
Indexed Addressing	39
Auto Addressing	40
SCC Addressing	41
Configuration Methods	42
Serial	42
Ethernet	42
Telnet	42
Web Management Interface	43
Installation	45
Chapter Overview	45
Supported Products	46
Installing the HP Surestore Bridge	48
Location	48
Unpacking the Box	49
Using the HP Surestore Bridge on a Desktop	49
Installing the HP Surestore Bridge into a Rack	50
How to Assemble the L-brackets to the Fibre Bridge	53
Installing the Fibre Bridge in the Rack	54
Power Distribution Unit Installation (PDU)	56
PDU Installation in the 20/700 Tape Library	56
PDU Installation in the 10/180 Tape Library	58
Interfaces and Connections	59
Fibre Channel Connection	60
SCSI Connection	60
Ethernet Connection	62
Serial Port Connection	62
Autobaud Feature	63
Installing Cables	64
Fibre Bridge Connection, Basic Configuration Example (Tape Libraries and MO Jukeboxes)	64
Fibre Bridge Connection, Expanded Configuration Example (Tape Libraries Only)	67
Optical Fibre Channel Cables	70
Power Cord Connection	71
Configurations	73
Chapter Overview	73
Powering on the System	74
Changing the Default Settings	75
Setting Up Serial Port Communications	78
Power-Up Messages for the FC 2/1 LV	79
Power-Up Messages for the FC 4/1 HV	81
Perform Configuration	83
Baud Rate	84
Fibre Channel	84
SCSI	87
Ethernet	90
Fibre Channel-to- SCSI Mapping	93
SCSI-to-Fibre Channel Mapping	97
Utility Settings	97
Trace Settings	97
Event Filter	99
Real- Time Clock	99
Save	100
Restore Last Saved	100
Reset and Save to Factory Defaults	100
Active Fabric	101
Management Operations	103
Chapter Overview	103
Management Interfaces	105
Serial	105
Ethernet	105
Telnet	106
Web Management Interface	107
In-Band Management	107
Serial or Ethernet Interface	109
System Utilities	110
System Statistics	111
Event Log	115
Diagnostics Mode	116
SCSI External Wrap Test	117
Trace History	118
Get a Copy of Trace Buffer	118
Reboot	120
Backup/Restore Configuration Settings	121
Download a New Revision of the Firmware	123
Upgrade Firmware	123
HTTP Interface	127
Chapter Overview	127
Accessing the HTTP Interface	128
Making Changes via the HTTP Interface	129
Main Menu	131
Main Menu > Identity Page	131
Main Menu > Configuration	132
Main Menu > Utilities	150
Main Menu > Discovery	160
Main Menu > Report	161
Main Menu > Reboot	162
SAN Environments	163
Chapter Overview	163
Installation and Configuration	164
Omniback Configuration	166
HP-UX Configuration	170
Stopping the dm_stape process	172
Preventing dm_stape from polling	175
Windows Configuration	176
Windows 2000 Removable Storage Manager	176
Solaris Configuration	178
Switch Configuration	179
HP/Brocade Switch and Fibre Channel Bridge Configuration	179
FC-64 Director (McData) Switch	180
Troubleshooting	181
Chapter Overview	181
LED Indicators	182
Basic Verification	184
SCSI Bus Configuration	184
Fibre Channel Connection	185
SCSI Devices in Windows NT	185
Device Recognition in HP-UX	186
Configuration	187
Devices	187
Host Configuration	187
HBA Device Driver Information	187
Serial Port Problems	188
Diagnosing Problems	189
Cannot Turn On the Tape Library or MO Jukebox	189
Cannot Turn On the Fibre Channel Switch	189
Cannot Turn On the Fibre Bridge	189
Cannot Confirm the Library or MO Jukebox Connection (Windows NT	190
)	190
Cannot Confirm Connection Through a Fibre Channel Switch	192
Cannot Confirm the Library or MO Jukebox Connection (HP-UX	192
)	192
Serial and Ethernet Pin Assignment	195
Controller LUN Commands	197
General Commands	199
Report LUNs Command	199
Copy Manager	202
Extended Copy Command	202
Receive Copy Results Command	202
In-Band Management	206
Download Command	206
Identify Unit Command	209
LUN Inquiry Command	210
Virtual Inquiry Command	212
Additional Vendor Unique Information	214
Mode Page Descriptions	216
Bridge Configuration Mode Page (0x20)	216
Bridge Net Configuration Mode Page (0x21)	218
Bridge Fibre Channel Configuration Mode Page (0x22)	220
SCSI Configuration Mode Page (0x23)	222
SCSI Statistics Mode Page (0x28)	223
PRLI Data	226
Addressing, Structures and Operation	227
SCC Addressing Option	230
SCSI Initiators to Fibre Channel Targets	231
Enabling DHCP	233
Setting up DHCP over Bridge Interfaces	235
Serial and Telnet Interfaces	235
Ethernet Configuration	237
Ethernet IP Address, Subnet Mask, and Gateway Address	239
HTTP Interface	240
HTTP Troubleshooting	241
General DHCP Troubleshooting	242