HP Surestore Tape Library Model 20/700 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 37
Fibre Channel-to- SCSI Mode, Auto Addressing
View all HP Surestore Tape Library Model 20/700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Fibre Channel-to-SCSI Mode This section describes the configuration of the bridge when acting as a target to a Fibre Channel initiator passing Fibre Channel protocol (FCP) requests through to SCSI target devices. By default, the bridge is in this mode. The bridge uses hard addressing on the Fibre Channel loop and auto addressing for target device mapping. Auto addressing is described in more detail under Auto Addressing on page 42. The bridge automatically detects if it is connected to a FC loop or a switch and will use the appropriate protocol without further configuration. Chapter 2 Chapter 2 Fibre Channel-to-SCSI Mode 39
Chapter 2
Fibre Channel-to-SCSI Mode
39
Chapter 2
Fibre Channel-to-SCSI Mode
This section describes the configuration of the bridge when acting as a target
to a Fibre Channel initiator passing Fibre Channel protocol (FCP) requests
through to SCSI target devices.
By default, the bridge is in this mode. The bridge uses hard addressing on the
Fibre Channel loop and auto addressing for target device mapping. Auto
addressing is described in more detail under
Auto Addressing
on page 42.
The bridge automatically detects if it is connected to a FC loop or a switch and
will use the appropriate protocol without further configuration.