HP Surestore Tape Library Model 20/700 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 49

Unpacking the Box Unpack the bridge shipping container using the following instructions: 1. Select a location that ensures the front intake vents and back fan vent are clear of obstructions so air can flow freely through the bridge. 2. Remove all items from the shipping container. Check each one for damage. Keep the bridge in the protective bag until you are ready to install it. 3. Refer to the packing slip or contents list to make sure you received all the equipment you ordered. If an item is missing, contact your sales representative. Note Do not connect any devices or cables to the bridge until the bridge is secured in a rack or placed securely on a flat, level surface. Using the HP Surestore Bridge on a Desktop Use the following instructions to place the bridge on a table or desktop. 1. Remove the bridge from the protective bag. 2. Attach the stick-on feet to the bottom of the bridge to protect the table surface. 3. Place the bridge on the table or desktop. Be sure the air intake vents and back fan vent are clear of any obstruction. Chapter 3 Chapter 3 Installing the HP Surestore Bridge 51