HP Surestore Tape Library Model 20/700 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 73

Configurations 4 Chapter Overview ■ Powering on the System on page 76 ■ Changing the Default Settings on page 77 ■ Setting Up Serial Port Communications on page 80 ■ Power-Up Messages for the FC 2/1 LV on page 81 ■ Power-Up Messages for the FC 4/1 HV on page 83 ■ Perform Configuration on page 85 Because the various configuration methods of the bridge offer such similar functionality, this chapter will describe specific configuration options from the perspective of the serial interface only. The bridge allows the user to access many configuration settings through the serial interface. Among these settings are: ■ Baud rate of the serial port ■ Fibre Channel address ■ SCSI initiator IDs ■ Ethernet IP and MAC addresses ■ Fibre Channel-to-SCSI mapping ■ Trace level settings All of the above settings may be changed and saved. Note Unless otherwise indicated, configuration changes take effect when the bridge powers-on or reboots. Chapter Overview 75