HP Surestore Tape Library Model 20/700 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 26

Choosing a Location Physical Specifications Table 5 The FC 2/1 LV and FC 4/1 HV can be placed on a desktop or mounted into a standard 19-inch rack, depending on the specific requirements of the installation. The physical characteristics are as follows: Physical Specifications of the Fibre Bridge Height 1.7 inches (4.2 cm) Width 16.9 inches (42.9 cm) Depth 9 inches (22.8 cm) Physical package weight Approximately 7 pounds (3.18 kg) Environmental Specifications Table 6 Choose a location that meets the following criteria: Location Criteria Room temperature 40o -104o Farenheit Humidity 5% to 80% relative humidity, non-condensing Power source AC power voltage: 100/120V to 220/240V Clearance Rackmount configuration--required 1 EIA unit in a rack/ 1 EIA=1.75 inches (44 mm) - Requires 5 inches (125 mm) of clearance between the back edge of the Fibre bridge and the backplane of the rack to allow adequate room for cables. Note See Installing the Fibre Bridge in the Rack on page 56 for rackmounting instructions. 28 Choosing a Location Chapter 1