HP Surestore Tape Library Model 20/700 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 90

Ethernet This option allows for setting up all Ethernet network settings including IP address, subnet mask, IP gateway, Ethernet mode, physical address, and host name. Ethernet Configuration Menu Version X.X XXXX Ethernet Physical Address IP Address Subnet Mask Hostname IP Gateway Ethernet Mode :08:06:07:05:03:09 :1.1.1.1. :255:255:255.0 : :0.0.0.0 :10/100 MBps (Auto-Neg) 1) Change Ethernet Physical Address 2) Change IP Address 3) Change IP Subnet Mask 4) SNMP NOT SUPPORTED 5) Change Security Settings 6) Change IP Gateway 7) Change Hostname 8) Toggle Ethernet Mode 9) Toggle DHCP Configurations X) Return to previous menu ■ Select 1) to change the Ethernet physical address, or MAC address, of the bridge. Ethernet physical addresses are always assigned to Ethernet adapters by the manufacturers. ■ Select 2) to change the IP address of the bridge. The default for this setting is 1.1.1.1. ■ Select 3) to change the IP subnet mask for the bridge. The default for this setting is 255.255.255.0. ■ Select 4) SNMP not supported. ■ Select 5) to change security settings, including the user name and password. User names and passwords should be unique and kept confidential. Use a combination of letters and numbers when creating user names and passwords. ■ Select 6) to change the IP gateway for the Ethernet network of the bridge. 92 Perform Configuration Chapter 4