HP Surestore Tape Library Model 20/700 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 237

Ethernet Configuration This option allows for setting up all Ethernet network settings including IP address, Subnet mask, IP gateway, Ethernet mode, physical address, and hostname. HP Surestore Bridge FC 4/1 HV X.X XXXX Ethernet Physical Address IP Address Subnet Mask Hostname IP Gateway Ethernet Mode DHCP Configuration : 08:06:07:05:03:09 : 1.1.1.1 : 255.255.255.0 : : 0.0.0.0 : 10/100Mbps (Auto-Neg) : Disabled 1) Change Ethernet Physical Address 2) Change IP Address 3) Change IP Subnet Mask 4) SNMP NOT SUPPORTED 5) Change Security Settings 6) Change IP Gateway 7) Change Hostname 8) Toggle Ethernet Mode 9) Toggle DHCP Configuration X) Return to main menu For descriptions of selections 1) through 8), refer to Chapter 5. ■ 10Mps Only ■ 100Mps (half duplex) Only ■ 100Mps (full duplex) Only ■ 10/100Mps (Auto-Neg.) Select 9) to toggle the DHCP setting. When DHCP is enabled, this activates Dynamic Host Configuration Protocol and allows the bridge to be assigned a dynamic IP address from a DHCP server located on the Ethernet network used by the bridge. Appendix D Ethernet Configuration 239