HP Surestore Tape Library Model 20/700 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 43

Chapter 2 2. At the '>' prompt, enter the following command: TELNET where is the IP address of the bridge. This will start a Telnet session for the bridge. On Windows NT, a separate Telnet session window will appear. 3. Enter [root] for the default user name and [password] for the default password. It is recommended that you change the user name and password as soon as possible. See Ethernet Connection on page 64 for more information on setting up user names and passwords. 4. Access configuration options the same way you would for the serial interface. 5. To exit the Telnet session on HP-UX, simply close the window. On Windows NT, you may select the disconnect option from your Telnet client utility. In most Telnet utilities, this option is available as a menu item. Web Management Interface The bridge allows any standard Internet Web browser to view and change the bridge configuration. Information is dynamically generated in an HTML format by the bridge so that Web browsers can access it. To access the Web interface, enter the IP address of the bridge into the address field of a Web browser. Or, you can enter a URL using a host name defined by the user. To make changes to settings, use standard keyboard and mouse controls to input information and then select the [Submit] button to send the changes to the bridge. A user name and password are required before any changes can be submitted. The default user name is [root] and the default password is [password]. It is recommended that you change the user name and password as soon as possible. See Ethernet Connection on page 64 for more information on setting up user names and passwords. Changes will not take effect until the next time the bridge reboots, but the bridge can be forced to reboot by selecting the [reboot] option from the Main menu. Chapter 2 Configuration Methods 45