HP T5125 Administrator's Guide: HP Compaq t5125/t5135 Thin Clients, build S1ST - Page 32

Settings > Management &gt, Replicate Settings by using HP Thinstate, Deploy, DHCP Settings

Get HP T5125 - Compaq Thin Client PDF manuals and user guides
UPC - 082960980097
View all HP T5125 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Image setting capture is done. You may remove the USB drive. If you do not remove the USB drive, when you boot the system, you must press a key at the startup screen. 7. Click OK, and then close the window. Use the capture settings on the USB drive to replicate on different systems or restore the current capture back to its original setting after settings were altered. To use ThinState to deploy captured settings: 1. On the client to which you want to deploy captured settings, click Settings > Management > Replicate Settings by using HP Thinstate. 2. Plug in the USB flash drive on which you captured settings. 3. Click Next. 4. Click Deploy. 5. After image setting capture has completed, you may remove the USB flash drive 6. Click OK. NOTE: If you do not remove the USB flash drive, when you boot the system you must press a key at the startup screen. DHCP Settings 26 HP Compaq t5125/t5135 Thin Clients, build S1ST0031

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
Image setting capture is done. You may remove the USB drive. If you do not remove the USB drive,
when you boot the system, you must press a key at the startup screen.
7
.
Click
OK
, and then close the window.
Use the capture settings on the USB drive to replicate on different systems or restore the current capture
back to its original setting after settings were altered.
To use ThinState to deploy captured settings:
1
.
On the client to which you want to deploy captured settings, click
Settings > Management >
Replicate Settings by using HP Thinstate
.
2
.
Plug in the USB flash drive on which you captured settings.
3
.
Click
Next
.
4
.
Click
Deploy
.
5
.
After image setting capture has completed, you may remove the USB flash drive
6
.
Click
OK
.
NOTE:
If you do not remove the USB flash drive, when you boot the system you must press a key at the
startup screen.
DHCP Settings
26
HP Compaq t5125/t5135 Thin Clients, build S1ST0031